In the selection of release paper, the characteristics of cost, product quality and production process should be considered As for the selection of release paper, it is mainly suitable. In my personal understanding, there is neither absolutely good nor absolutely bad. Domestic products have the advantages of domestic products, while imports also have the advantages of imports. The selection of release paper is equivalent to a process of college entrance examination, because all factors should be considered comprehensively. In the case of balanced factors, a reasonable effect can be achieved that can reduce costs

　　1. Cost: There is a big difference between domestic and imported release paper. Generally speaking, domestic release paper is not very good. Especially for the three M tape and the Nippon tape, there are often mists on the surface or the release degree is too low to tear the release paper and the product apart. But the domestic release paper is certainly cheaper than the imported one. And there is a relatively large price ratio. If considering that the company's products are used for export, of course, it is better to use imported release paper, which will be more successful in customs clearance. Due to the characteristics of domestic release paper production equipment and production level. It determines the instability of domestic release paper in some products, and the serious consequence is the waste of adhesive tape.

　　2. Product quality. This is mainly reflected in that some products only need to maintain the product balance during transportation, so it will require that the product and release paper are not easy to fall down when combined. The selection of release paper is mainly suitable for personal understanding. There are neither all the good nor all the bad. Domestic products have the advantage of domestic products, while imports also have the strength of imports. The selection of release paper is a process of college entrance examination, because all factors should be considered comprehensively. Under the condition that various factors are balanced, achieving a fair result can reduce the cost.

　　3. Production procedures. The key point here is whether to press or cut. Generally speaking, the thickness of release paper will be required when stamping or cutting. Because low gram weight release paper is not easy to break when used for stamping, of course, this is also related to the friability of the base paper. The base paper with poor friability will tear the paper and the product apart when stamping or cutting. Not reaching the ideal or desired effect.